Ausrüstungen

Specific toSMTArea,Achieving simple high functionality,High value tin plaster printer,Stabilized printing,Simple Operations.

Main specification
Brand	Panasonic
Model	SP18
Type 1	SMT Equipment
Type 2	Solder Paste Printing & Jetting
Type 3	Solder Paste Printer
Size	W1100*D1536*H1430mm
Weight	1250kg
Voltage	SingleAC200V
Rated power
Gas source	0.5MPA,30L/min(A.N.R)
Operating System
Other

Basic parameters
Base sizemm	L50*W50-L510*W460(L330*W250*1)
Loop Time	8.0S+Printing hours
Repeat location precision	Positive and negative12.5Micrometres
Web Frame Sizemm	L736*W736/L650*W550(Long)L550*W650
Baseboard Positioning Benchmark	Centre
Baseboard Fixed Mode	Mechanical pick-up method (Standard),The way the board sucks (Selected)
Network frame position correction	XY Orientation±4 mm Rotate Direction±0.7°
Space	−0.5 mm ~ +3 mm
Back-of-board cleanup on the net	Dry or wet (Optional,It can be used together)
Netboard Clean Paper Size	Inline 20 mm Paper tube Length 15 m width 540 mm (Selected 350 mm)

Scratch
Shape	Modified metal razor,Improved plastic razor
Length	350 mm,530 mm
Speed	10 mm/s ~ 400 mm/s
Pressure	Input Range 5*10-2N/mm ~ 78*10-2N/mm (Workstation Length is 350 mm Time)(In fact, the range of presses available varies according to the type and length of the scratchboard.)Scratch pressure (The company recommended the seal as 10*10-2N/mm ~ 15*10-2N/mm.Print as10*10-2N/mm The following leads to instability in printing.)
Actions	You can use a single razor,Double razor switch